Good Information Articles

Internet Connected Inventory Control System Introduced by ArlynScales

East Rockaway, NY (PRWEB) September 15, 2008 -- Inventory control has always been critically important for production and manufacturing. Clearly, it is important to make certain that there are enough parts to produce the correct number of assemblies. These may include fastener components, such as screws, rivets, washers, bolts, nuts and others. A wide variety of other mechanical components may be necessary, such as valves, fittings, gaskets and enclosures. Often there are also electronic and electrical devices, such as capacitors, resistors, transistors, filters, connectors, microprocessors, memory devices and converter devices. A simple assembly may only consist of a handful of parts. But more complicated devices may require hundreds or even thousands of individual components.

While a manufacturing line can be brought to a standstill if even one item is missing, financial considerations discourage overstock. Too many parts may represent hundreds of thousands of dollars of excess inventory. An efficient organization must be careful to avoid this type of financial waste. Also, components that may be in excess of those currently required need additional space for storage, and more labor to keep track of it. Additionally, there is further risk of these components becoming obsolete if there are design changes or complete model changes. Furthermore, any inventory is always subject to losses from facility failure or even theft.

Keeping track of a large number of components can be a complex assignment. Purchasing these components and assuring delivery on a timely basis can be even more demanding. The personnel resources can include purchasing agents, shipping and receiving clerks, internal stocking personnel to get the components to the right storage areas, and information technology staff to keep track of all of this. These tasks can distract an organization from their primary goal of actually building the devices in question.

Many manufacturing organizations choose to outsource some or all of these responsibilities to distributors. These distributors may contract with a number of manufacturers to handle all of their stocking requirements. The distributors have extensive purchasing staffs and may be able to make very attractive arrangements with components manufacturers, as their volumes may be very high. They will generally also have an infrastructure that is suitable for purchasing from a large number of different vendors.

One of the most significant challenges facing the distributor is monitoring the number of parts in their clients' locations. One way, of course, is to visit each location periodically and perform a manual count of each part. This can be a very time consuming process. Parts counting scales (http://www.arlynscales.com/Counting-Scales-s/25.htm) can significantly reduce this amount of time. Using this type of industrial scale (http://www.arlynscales.com), a small sample of parts is counted manually and placed on the scale platform (http://www.arlynscales.com/Platform-Scales-s/3.htm). The operator enters the number of parts in the sample, and the digital scale (http://www.arlynscales.com/Digital-Indicator-for-Industrial-Scales-Steel-p/digital-scale-indicator.htm) will automatically calculate the weight of an individual part. Now the entire bin of parts may be placed on the scale. Knowing the weight of the bin, the scale will automatically subtract out that weight, leaving only the weight of the parts in the bin. Recalling from memory the weight of the individual part, the scale can divide this value to calculate the total number of parts in the bin. The operator may now record this, and determine if additional parts need to be ordered.

Some higher quality parts counting scales (http://www.arlynscales.com/Counting-Scales-and-Uses-in-Postal-Bulk-Mailing-Operation-s/70.htm), such as the Arlyn brand, allow the operator to store many parts weights in the internal memory of the scale. Each part is stored with the part name. A menu can be accessed to see each item and part weight. Recalling this part weight allows the scale operator to skip the sampling process, making the counting process more efficient.

It would be far preferable, though, to be able to keep track of inventory remotely. Distributors clients may have a number of different locations, and some of them may be quite distant. The time and effort to perform a manual inventory, and the number of people required to do this can become quite significant.

To address these issues, a Bin Inventory Control System has been introduced by Arlyn Scales. The system consists of three major systems. Parts bins are placed on Drawers which rest on the storage shelves. These drawers can have a profile as low as 1 ½", so they will not interfere with the shelving system. Each drawer may include up to four built in scales, for four parts bins. The drawers include a digital display, which will show the weight of each bin of parts. They also act as independent parts counting scales. The piece weight of the components in each bin can be entered into the display. Also, the minimum acceptable inventory amount, and the maximum acceptable amount may be programmed into the drawer. The drawer includes red and green indicator lights for each bin. Using this system, the actual number of parts in each bin may be read from the display. A green light will be present if the inventory is within the acceptable range. A red indicator will light if it is outside that range, so that action may be taken.

While it is useful to be able to see this information locally, it is preferable for the distributor to be able to monitor this from their own central offices. Therefore the Arlyn design allows a large number of drawers to be wired together in an industrial network. Using an industry standard RS-485 (http://www.arlynscales.com/Ethernet-Option-and-RSS-232-Functionality-for-Scales-s/58.htm) network, dozens of drawers may be connected together, and may then be attached to the second major system called a network "Master". This device collects the data from all of the bins in all of the drawers. It also has an Ethernet port to connect to the clients' local area network.

The final major system is the software that connects the distributor to any of the Master devices from their own location and collects and analyzes the data. Typically, whenever a system tries to access any devices from within another local area network, there are a number of security and communication challenges. Devices on an internal local area are protected from exactly this type of intrusion, as it may be a pathway for improper access. Firewall hardware and software and other types of filters will block this access. The Arlyn system securely and appropriately allows only authorized users to only connect to the parts bins on the client's network.

The distributor may access the information, in database format, from the client's drawers using any browser enabled device that is Internet connected. Of course, proper password and access information is required to connect to the system. A large number of Master devices may be programmed to communicate with the distributor's database. Each Master may be in a different location. The database is arranged so that each client will be shown as a different entity within the system.

The distributor may also program minimum and maximum inventory levels for each of the bins. Alarms will be noted in the database software for each component that falls outside of the acceptable levels.

Bin information is sent to the database at regularly scheduled intervals. These intervals may be programmed by the client. Depending on the volume of usage, and the frequency of refilling the bins, the interval may be once a day or even less often, or as often as once every few minutes. As the data is entered into the distributor's database, the date and time will also be noted. This provides further information to the distributor as to the rate of usage of those components.

Because the software and database are browser based, more than one office person within the distributor organization can access this information. For example, an account representative can view the component consumption for his client, while a purchasing agent can collect all of the items that need to be placed on order. Another example could be a situation where the client had facilities in two different locations, each of which was serviced by a different office of the distributor. Again, the account executives and purchasing agents from both locations would have the ability to access the data from both sites of the client. As an added benefit, the account executive who may have an appointment with his client could review the client's data on his web enable cell phone immediately prior to the visit. If any shortages were noted, he could already have made arrangements for restocking, as he arrives at the client's facility.

###

Other Article Sites

findabook.com  moneycd.info  a-mortgage.info   about-lemon-laws.info  aboutstudentloans.info
all-about-publishing.info  auctions-articles.info  bestcollege-university.com  bestispconnection.com
biblefolder.com  blogger-website.com  books-used.info  brokers-guide.info  buywindows.info  cable-dsl.info
career-miner.com  carpel-tunnel.info  cashinaflash.info  cashloanreviews.info  casinobell.com  chat-house.info
clearmycredit.info  collegeloantips.info  crones.info  depression-articles.info   dirnic.net  dishguides.info
divers-below.com  expodog.info   financewizz.com  fire-insurance.info  getgood.info  handleit.net   it-idea.info
health-supplies.info  hosting-right.com  insidealert.com  insurance-facts.info  jobs-employment.info
justgood.info  lookgold.net   lowcost-travel.info  money-source.info  myhostzone.info  numisblog.com
peoplesearchfinder.info  pr-articles.info  realeas.com   refinancing-guides.info  spyware-remove.info
telelot.info  the-law.info   toppaid.info  travel-deals.info  travelcorrect.com  wedding-guide-site.com
your-blog.info  your-credit.info

MORE ARTICLES:

Home Internet Business Opportunities: Reinvent Your Family
Think about your daily job, daily responsibilities, time spent at meetings, driving your kids to this activity and that sporting event, meal planning and preparation, house cleaning, on and on with our grossly busy lives, and what time is left for our family? Do you really think that 9-5 JOB is the answer to all of our hopes and dreams? Do you really think it was our personal goal to spend the majority of our lives at work? When was the last time you saw your son/daughter play in that school volleyball game or run in their cross country meet? Isn?t it time to put your family first?

Home Based Internet Marketing Business - Staying Organized In Your Home Office
When working from home there is nothing more frustrating than not being able to find things when you need them. While most home business entrepreneurs see themselves as never having any time, you have to spend some of your time to organize things. If you can't daily, you should at least try for once a week, you should set aside some time to put things where it should be. Allot of people have a saying that there is a spot for everything and everything must be in its assigned place.

Online Magazine is Home to the Best Travel Writing on the Internet
For the second year in a row, SoGoNow.com is the home to the best travel article written for the internet as judged by the North American Travel Journalist's Association.

Family Circus - Make Time For Family With An Internet Business
Sometimes, it seems like you don?t have a full 24 hours in a day. Between work, family, and sleep, there is no time for anything else. You never seem to have five minutes to relax, and on days when work requires overtime, you lose time with your family. In fact, it seems you never spend quality time with your children anymore. One way to get your life back under your control and manage time better is to start your own internet business. With an online business opportunity, you can decrease your work hours overall, as well as become more flexible and available for your family.

Making Time For Your Family and a New Internet Home Business
Starting your own internet home business can be a very fulfilling experience. It offers many new and exciting challenges, with the hopes of providing financial security for you and your family.

SoGoNow.com -- Home of the Best Travel Article Written for the Internet in 2006
SoGoNow.com travel magazine announced that frequent contributor Linda Fasteson has won First Prize for the Best Travel Article Written for the Internet from The North American Travel Journalist Association.

Families Mourning Children Travel to Nashville for July Compassionate Friends National Conference
The Compassionate Friends self-help support organization for families going through the natural grieving process following the death of a child is hosting its 31st national conference July 18-20 in Nashville, Tennessee. More than 1300 parents, siblings, and grandparents, as well as professionals who provide support, are expected to attend the conference. Highlights include well-known speakers, more than 100 workshops covering most aspects of grief following the death, a pre-conference Professional Outreach Day, and the Walk to Remember Sunday July 20 at 8 a.m. This conference is annually the largest in the United States aimed specifically for those left behind following the death of a child.

Internet Marketing Business - Your Home Based Internet Marketing Business and the Freedom Attached with it
There are various reasons why there are many individuals who want to start their own home-based Internet marketing business. Some are saying that the amount of money that they are earning from Internet marketing is higher compared to their monthly salary from their regular work. It even comes to a point that they are earning money similar to or more than the salary of their managers and department heads! This is relatively true, since there are Internet marketers who are earning as much as a hundred thousands of dollars within a month.

Sales of Children's Travel Bed Soar as Summer Travel Hits
Gentle Air has seen an increase in summer travel sales due to hotels at popular summer attractions charging high prices for rollaway beds and cots.

Low-Income Families in Portland Will Soon Have Free Broadband Internet at Home
Cricket Will Provide Free High-Speed Wireless Internet to 100 Portland Families in Pilot Program with One Economy

Children's Home Society & Family Services Receives Reaccreditation to Once Again Facilitate Adoptions in Russia
Children's Home Society & Family Services, a Minnesota-based international adoption service provider, announced today it has been re-accredited by the Ministry of Education and Science of the Russian Federation to facilitate adoptions in that country.

Family Travel at its Finest - European Villa Rentals Perfect for the Whole Family
Parents can easily find family friendly villa rentals in Europe with Rentvillas.com.

Internet Based Business: How Single Parents Could Earn Extra Income For The Entire Family
Are you a single parent who has been trying to support your children on a single income? If you have been having so much trouble making both ends meet with your present income, you might want to earn some extra money by setting up an internet based business. A big family with children can be very expensive and you definitely will need to earn some extra money to keep everyone comfortable. Having some extra money could really do wonders for you and your small children so you better start exploring other means of getting extra money for your children through an internet based business.

Work At Home Internet Home Business Opportunity
There are various opportunities for work at home Internet home business opportunities on the Internet Because of the Internet, there are many opportunities for people to be able to take care of their families and work from home and as well